Comprehensive Power Circuit Tester
Switch to Mode I, you’ve just activated the Power Circuit Probe Tester, which supports 4 working modes: AC/DC Voltage, Resistance, and Diode. The electrical probe tester allows users to check 12V and 24V electrical systems instantly, tells you whether the wire or circuit is live, and identifies which side of the circuit you are on, positive or negative.
NOTE: This circuit tester can be powered by either connecting to the cigarette lighter or the vehicle’s battery, with no external battery needed. Its advantage lies in fast detection, convenient power supply, and easy operation for automotive electrical diagnostics.
Locating Breaker Point Efficiently
Switch the V200 Pro All-In-One Circuit Tester Kit to Mode II, you will be able to use the breaker finder, which can easily locate the circuit breaker point, open connections, broken wires, and current leaks with tone change, and even trace wire or cable without damaging the insulation. This circuit breaker finder tool works on all kinds of vehicle circuit issues such as those found in cars, SUVs, minivans, trucks, tractors, boats, and RVs, with voltages between 6 and 42 volts DC. Key advantages include accurate fault locating, wide vehicle compatibility, and non-destructive wire tracing for efficient diagnostics.
Component Activation & Sensor/Signal Circuit Test
VdiagTool V200 Pro power circuit probe kit can generate activation signals to electrical components like car lights, motors, windshield wipers, radiator fans, relay, fuel injector and etc to troubleshoot electrical problems; locate auto short circuits if you keep getting blown fuses and also test various sensors, signal circuits to pinpoint the root cause to electrical issues when you have extracted DTCs from vehicle ECUs.
Overload Protection To Protect Car Electronics
This automotive electrical tool comes with short circuit protection. Whenever it becomes overloaded, it will automatically shut down and restart, serving as a safety measure to protect both the device and the vehicle’s electronics. Useful Tip: You can also use the overload protection feature to conveniently test short circuits.
NOTE: If you receive a defective unit or experience any malfunction, please contact us at service@vdiagtool.com for a hassle-free replacement at any time.
20ft Extension Cord To Work Anywhere Around The Vehicle
The V200 Pro power circuit probe tester comes with a 20-foot long cord plus a 20-foot extension cord. Combined with the feature that it can be powered by the cigarette lighter and the alligator clip for convenient ground connection, you can test the electrical circuit system anywhere around the vehicle. No more worrying about a short cord while testing the electrical system!
NOTE: Mode II circuit breaker tester is powered by one 9V battery.
FAQs-V200 Pro
This automotive electrical tool comes with short circuit protection. Whenever it gets overloaded, it will shut down and restart, which is a safe measure to protect the device and car electronics. For more details or a better price, please reach out to us via service@vdiagtool.com or chat online with us directly.
The breaker finder(mode II) of the V200 Pro needs a pair of 9V battery to power up, but the circuit tester(mode I) doesn't need battery to power up, which can be powered by connecting to cigarette lighter or vehicle's battery. For more details or a better price, please reach out to us via service@vdiagtool.com or chat online with us directly.
Yes, it does. V200 Pro can test Relay. Besides that, it can also support Circuit Breaker/Open Test, Tracing Wire, AC/DC Voltage Test, Diode Test, Resistance Test, Polarity Test, Continuity Test, Ground Test, Activate Components, Signal Circuit Test, Fuse and Trailer Light Test. For more details or a better price, please reach out to us via service@vdiagtool.com or chat online with us directly.
VDIAGTOOL V200 Pro power circuit probe kit can provide power to electrical components like car lights, motors, windshield wipers, radiator fans, relay, fuel injector and etc. For more details or a better price, please reach out to us via service@vdiagtool.com or chat online with us directly.
You can turn the rotary switch clockwise or anticlockwise to adjust the sound. You can also use a earphone plugging it into the device. If this way can't help, the device seems to be defective. If convenient, please shoot a short video showing the problem so that we can better locate the cause and provide more accurate solution.
You are welcome to contact our customer support team at service@vdiagtool.com, or reach out to us online for further assistance.
It is mainly used to find open circuit, short circuit, etc. After switching to Mode 2, it is normal that the main unit screen does not light up. In this mode, please make sure the breaker finder has fresh battery installed and the right dial is set to the maximum. In addition, make sure the red and black clips are correctly clamped on the wire to be tested.
We'd like to clarify that the V200 Pro does have the ability to detect whether a circuit is shorted or not, but it is not designed to pinpoint the exact location of the short. To use this function correctly, the red and black alligator clips need to be attached to the wire or circuit you wish to test and then use the device to perform.
Yes. Mode II-breaker Tester is powered by 1pcs 9V Battery. Please check whether the battery is normal before use. When this part is unused, suggested to remove the battery directly to avoid draining the battery power.
YOU MIGHT ALSO LIKE
RECENTLY VIEWED PRODUCTS