VdiagTool V200

🛠️VdiagTool V200 is the must-have tool for any automotive electrical system for 99% electrical issues

✅Versatile Functionality: It handles everything from wire tracing to signal circuit testing.

✅Safe and Reliable: Built-in circuit breaker protection ensures your vehicle’s safety.

✅Effortless Reach: With its 40ft extension cord, no circuit is out of bounds.

✅Activate Components Instantly: Relays, fuses, trailer lights—test them in seconds.

✅Diagnose and repair confidence, whether in the shop or on the go.

⚠️ Important Notice: To avoid potential damage to your device or vehicle, please follow the instructions carefully before use. If you encounter any issues, feel free to contact our professional customer support team for assistance.

🔍V200 Electrical System Circuit Tester Features

✅4 Test Modes: DC voltage, AC voltage, resistance test, diode test.

✅DC Voltage Range: 0-65V; resistance range: 0-100 kΩ; rated current: 1-10 amps; frequency response of sound channel: 0Hz to 10Khz.

✅Quick Self-test: Before testing a circuit or component, ensure your tool is in good condition with a quick self-test.

✅Component Activation: To troubleshoot electrical faults, the component activation function generates an activation signal to the tested component (such as car lights, motors, windshield wipers).

✅Current Overload Protection: The V200 circuit tester has a short circuit protection function. If the internal circuit breaker is overloaded, it will trip.

✅Quickly Identify Polarity: The V200 car probe tester can easily check component continuity and identify positive, negative, and open circuits.

✅Built-in Light: Let you work more safely in the dark.

✅20FT cord plus 20FT Extension Cord: Covering from the front to the back of the vehicle, you can easily check the entire circuit system.

Note: Operating voltage: 12–24V; Measurement range: 9–30V.

✔Quick Self-Test ✔AC/DC Voltage Test ✔Diode/Resistance Test ✔Polarity Test, Sensor, Signal Circuit Test ✔Activate Components ✔Relay, Fuse, Trailer Light Test ✔Auto Circuit Breaker ✔Locate Short Circuits ✔Short-circuit Protected ✔Fault Finder.

🧰4 Operating Modes

✔DC Voltage: When the V200 Voltage Detector is in this mode, touch the probe tip to the circuit, and then the LCD will read the DC voltage with a resolution of 0.1 volts. 

✔AC Voltage: When the Circuit Tester V200 is in this mode, touch the probe tip to the circuit, and then the LCD will read the maximum voltage, minimum voltage, and frequency. 

✔Resistance Test: When the VdiagTool V200 is in this mode, touch the probe tip to the circuit, then the LCD will read the resistance between the tip and the auxiliary ground lead. 

✔Diode Test: In this mode, the probe tip touches the anode of the diode, connects the auxiliary ground lead to the cathode of the diode, and the screen will display the forward voltage drop, indicating forward bias. If the probe tip and auxiliary ground lead are switched, the screen will not display the voltage, indicating reverse bias.

🔧Quick Self-Test

Before testing a circuit or component, do a quick self-test to ensure the tool is in good condition.

💥Polarity Identification

VdiagTool V200 automotive probe tester can easily check component continuity and identify positive, negative, and open circuits. If the probe tip is connected to the positive pole, the red LED will light up and a beep will sound; if the probe tip is connected to the negative pole, the green LED will light up and a low tone will sound. When there is an open circuit, neither LED will light up. You can also use this circuit tester to find shorts in your car if the fuse keeps blowing.

🚙Vehicle Starting Components

VdiagTool V200 Automotive Probe Tester can easily check component continuity and identify positive, negative, and open circuits. If the probe tip is connected to the positive terminal, the red LED will light up and a beep will sound; if the probe tip is connected to the negative terminal, the green LED will light up and a low tone will sound. When there is an open circuit, neither LED will light up. You can also use this circuit tester to find short circuits in your car if the fuse keeps blowing.

🔄Two Charging Modes

VdiagTool V200 circuit tester is powered by a vehicle battery and cigarette lighter.

📦All-in-One Packaging Kit