VDIAGTOOL VC200

✅ Professional Car Paint Thickness Meter For Used Car Buyers & Pros

VDIAGTOOL VC200 paint thickness gauge helps used car buyers/dealers to check whether repainting occurred(factory paint thickness 4-7mils), auto detailers to quantitatively measure & control the amount of clear coat (1.5-2.0 mils) removed when sanding and buffing, and body shops to prevent disputes before paint jobs. It’s also extremely useful for dealerships, painters, appraisers, inspectors when coating depth measurement is involved.

✅Ultra High Precision

 VDIAGTOOL VC200 paint thickness gauge, equipped w. high-precision Fe/NFe dual probe, is a hand-held, non-destructive coating thickness gauge, ideal for checking the car painting thickness checker. Resolution: 0.01mils/0.1um(＜100um) 1um(≥100um); Measuring Range: 0~59.1mils; Accuracy: ± 3%, Measuring Units: um, mil and mm; 3 Calibration Modes: Basic, Zero Point and Offset Calibrations; Dual Fe/NFe Probe: High Precision, Auto Substrate Recognition; 3 Modes: Single, Continuous, Differential.

✅FE/NFE Dual Probe, Automatic Substrate Recognition

VC200 car paint gauge thickness meter comes with Fe/NFe high precision dual probe that can work on both ferrous(steel, iron) metals and non-ferrous(aluminum) metals etc and automatically recognize the substrate it measures. Thanks to the dynamic design and the V-shaped probe sensor, this digital paint depth gauge accurately measures on concave, rough and convex surfaces without scratching the paint.

✅Single, Continuous, Differential Modes

VC200 paint thickness gauge comes with 3 useful test modes to help professionals effectively monitor paint depth: SNG-measure one time and stop, best for spot check; CTN-continuously measure the paint depth as long as the probe remains on substrate surface, best for test of a particular area; DIF-displays the thickness difference between two consecutive measurements, best for depth difference check to inspect paint job quality and collision damage.paint thickness gauge.

✅Basic, Zero-point & Offset Calibrations

This paint meter for cars provides 3 calibrations to deliver more accurate measurement results: Basic Calibration, Zero Point Calibration and Offset Calibration to measure included uncoated metal(iron or aluminum) to ensure the meter reads “0”, and the plastic shims when placed over uncoated metal for various thickness readings, and offset reading differences.paint thickness gauge.

✅USB Rechargeable & Professional Assistance

This automotive paint depth gauge can be charged up with a USB cable (included in the package), no battery required. We offer 3 Years Warranty and Lifelong after-sale service. Any questions, kindly reach us via service@vdiagtool.com.

💡Here are top 4 reasons why you should use a coating thickness gauge

To check for past accident damage or repair history– Accident damage is a major issue on cars. Many owners or sellers will try to hide the fact that their vehicle has been in an accident or will try and downplay the severity of the accident. A paint depth gauge will be able to show you any discrepancies in the thickness of a car’s paint or coating. This means that you can check if the vehicle has been repainted or repaired at any point.

To check for rust or rust repairs – This sort of ties in with the above but is equally as important. Rust is a major issue in cars. If you find an area where the paint thickness is different or where the gauge doesn’t work at all, it may indicate past or present rust problems. Rust or bodged rust repairs can be a death sentence for vehicles, so use a coating thickness tester.

To appraise the car value in its own worth and save money – Hidden away accident history or rust repairs of a car will greatly reduce its real value and increase its possibility of repair down the road, a mil gauge meter becomes extremely useful to prevent you buying a lemon or overpaid for a used car.

To measure and monitor clear coat removed while sanding and buffing automotive paint – A professional paint depth gauge will help auto detailers, auto body shops, collision technicians, workshops, etc to test and measure how much clear coat has been removed while sanding and buffing the clear coat while repairing the car body.

✅3 Testing Modes & 180° Rotating HD Display

>>>Single/Continuous/Difference Measurement

Single measurement (SNG): One data per measurement

Continuous measurement (CTN): Keep measuring when the probe remains on the substrate surface

Difference measurement (DIF): The difference between this measurement and the previous measurement.

Press "Down Button" to switch the units as μm, mil or mm.

>>>Digital HD Display & LCD Backlight & 180° Rotated Screen

Unlike other items, this automotive paint depth gauge has uncluttered, easy-to-read displays, that only give you the information you need at the time. Additionally, LCD backlight (Right Button) is going to be much easier to read in the dark than physical scales.

The 180° rotated screen of this paint thickness gauge allows you to read the data easily from any angle!

>>>USB Rechargeable

This paint-thickness tester is a rechargeable device that can be charged up with a USB cable. So you don’t have to rush out and buy batteries if the device runs out of juice.

✅High-Precision Fe/NFe Dual Probe That Automatically Identify Ferrous & Non-Ferrous Substrates

>>>Precise Fe & NFe Probe

A fast coating thickness gauge can speed up an inspection a lot! You will be able to cover the whole car much quicker than if you have to wait after each reading. This paint gauge thickness meter adopts the precision probe which can identify magnetic metal substrate (ferrous, iron, and steel) and non-magnetic metal substrate (non-ferrous, aluminum) automatically, the coating thickness data will be measured quickly and accurately!

>>>Resolution: 0.1μm/0.01mil (<100μm); 1μm/0.1mil/0.001mm (≥100μm)

>>>Accuracy: ±5μm(≤150μm); ±(3%H+1μm)(>150 μm)

>>>Auto Power Off

Press ZERO button to turn it on, and it will shut down after 2 minutes automatically if there is no operation;

Press the ZERO button to turn it on, the screen will display [UOFF] and then start, the automatic shutdown function is closed in this case.

ATTENTION!

Keep the probe away from the measured substrate when starting up

If the screen shows“-OL-”, it indicates that the value exceeds the measurement range

Do not press the probe sensor with your finger or other objects, because this may damage the sensor parts and the device

✅Three Modes of Calibrations to Get Accurate Paint Depth Results

>>>Zero Calibration

Place the paint depth tester meter vertically on a metal substrate, then press the "ZERO" button and wait until the zero point calibration is completed.

>>>Basic Calibration

Press and hold "LEFT BUTTON " to enter/exit basic calibration. The [CAL] icon will be displayed on the screen. Put the plastic foils on the uncoated piece of metal included consecutively and perform 7-point calibration in sequence (0.0μm, 50.0μm, 100μm, 250μm, 500μm, 1000μm, 1500μm).

If there is a difference between the value displayed on the screen and the calibration standard foils to be tested, please press" UP/ DOWN" key to adjust the value on the screen until they match.

The screen will display [OVER] after calibration. At this time, lift up this mil thickness meter for metal and [CAL] disappears.

>>>Offset Calibration

Under single measurement mode, put a thick plastic foil on the metal substrate, place the tester vertically on the foil and start testing, press "UP/ DOWN" to adjust the displayed thickness value to match the actual foil value, then the offset calibration is done.

NOTE:

1. Magnetic and non-magnetic metal base calibration does not affect each other, so please do them separately.

 2. If you still don't know how to do the calibrations after checking the user manual, please reach us via service@vdiagtool.com.